
 |
Upcoming Events

| For CINDE meetings and events contact:
CINDE Administrator
135 Fennell Avenue West
Hamilton, Ontario
Canada L8N 3T2
Tel: 905-387-2004
Fax: 905-574-6080
|
For ASNT meetings and events contact:
ASNT Conference Department
1711 Arlingate Lane
PO Box 28518
Columbus, OH USA
43228-0518
Tel: 1-800-222-2768
or (614) 274-6003
Fax: (614) 274-6899 |
Events in Canada
To see a summary of Past Events, click here.
| Date | Event Description |
Wednesday, July 31 2013 to Friday, August 2 2013
Location: Quebec City, Quebec, Canada
Contact: Visit http://intl.gel.ulaval.ca/index.php or contact Prof. Xavier Maldague at quebec@gel.ulaval.ca
|
Seventh International Workshop for Advances in Signal Processing for Non Destructive Evaluation of Materials (IWASPNDE)
The question of processing of Non Destructive Evaluation (NDE) signals is of prime importance, it allows to assess material integrity and quantify detected flaws with reliability. The scope of this Seventh International Workshop will be particularly focused on the cross-fertilization of the fields of NDE and signal processing with participation of international specialists from both fields. Additionally, the Workshop will be an opportunity to perform a reflection on recent developments and also analyze new emerging techniques which are seen promising. We recall that the First, Second, Third, Fourth, Fifth and Sixth Workshops were held respectively in 1987, 1993, 1997, 2001, 2005 all in Québec city but with the 6th edition held 2009 in London, Ontario when it was part of the NDT in Canada 2009 conference organised jointly with the Canadian Institute for NDE (CINDE). The next Workshop will be held in Quebec City in Summer 2013. The 7th Workshop will take place jointly with the conference ISEM 2013 (16th International Symposium on Applied Electromagnetics and Mechanics). |
Monday, September 23 2013 to Friday, September 27 2013
Location: Canada wide
Contact:
Catherine Wood Member Relations and Multimedia Specialist 416.367.5900 ext. 29
CSTD National Office 720 Spadina Avenue, Suite 315 Toronto, Ontario M5S 2T9 Tel: 1.866.257.4275 Fax: 416.367.1642 Office hours are Monday - Thursday 9 - 5, and Friday 9 - 4
|
CSTD Announces 2013 Learn at Work Week
Learn @ Work Week is an annual celebration recognizing the value of workplace learning and development in Canada. Workplace learning has a positive impact on employee performance and productivity and is crucial to a healthy Canadian economy. Join Canada’s workforce as it engages in learning activities and professional development events this September 23-27, 2013 and power up your workplace! Click the links below to learn how you can participate in Learn at Work Week 2013! Visit the Learn @ Work Week group to share your celebrations, brainstorm ideas, and access promotional materials Celebrate the 2012 Learning Leaders! View the 2012 Learning Supporters |
Wednesday, October 2 2013 to Thursday, October 3 2013
Location: Calgary, Alberta
Contact: Sharon Cornwall Managing Director sharon@talenthub.ca 587-891-6263 http://www.talenthub.ca/
|
Women in Engineering Expo
Talent Hub is presenting Women in Engineering Conference. Fall 2013 Included in the conference is a career fair, presentations, keynote speaker and an elegant Banquet celebrating Women in engineering: (Voices of Experience, 35 Under 35, Movers and Shakers). WEE’s aim is to attract young women to the incredible opportunities an engineering career path can provide. We're proud of the success of Women in Engineering and while we've come a long way, there is still much work to do. Please visit the conference website for more details: http://www.talenthub.ca/conference.html |
Monday, October 7 2013 to Thursday, October 10 2013
Location: Calgary, Alberta
Contact: Don Courchesne Member Services Coordinator Canadian Institute for NDE Telephone: 905-387-1655 ext. 238 1-800-964-9488 ext. 238 Fax: 905-574-6080 CINDE website CINDE events CINDE on Facebook: Search "Canadian Institute for NDE"
|
NDT in Canada 2013 Conference
The Cansmart Group (CANSMART), Fraunhofer Institute for Nondestructive Testing (IZFP) and the Canadian Institute for NDE (CINDE) invite authors and presenters to submit abstracts for the International Workshop on Smart Materials and Structures, SHM, and NDT for the Energy Industry to be held in conjunction with the NDT in Canada 2013 Conference. The program will feature presentations on advances in NDT pertaining to the energy industry including emerging techniques and trends for the oil and gas, petrochemical, nuclear, hydroelectric, solar, and wind turbine sectors. Special sessions featuring national and international speakers will address the current outlook for smart materials, smart structures, and associated applications which include NDE and structural health monitoring. Other topics include the inspection of materials, testing of structures, and recent developments in NDT personnel training, education, and certification. For conference information, please visit our website: http://events.cinde.ca |
Wednesday, October 23 2013 to Friday, October 25 2013
Location: Banff, Alberta
Contact: Abstracts of papers and descriptions of short courses (approximately 300 words) should be submitted as soon as possible, to:
Prof. Qiao Sun Department of Mechanical and Manufacturing Engineering University of Calgary 40 Research Place, NW Calgary, Alberta T2L 1Y6 Tel: (403)220-4141 Email: qsun@ucalgary.ca Contact Prof. Sun if you have questions about possible paper/presentation ideas or program suggestions.
|
CMVA Machinery Vibration, Reliability and Maintenance Training Seminar and Annual General Meeting
The annual CMVA Seminar is organized to provide a forum for technology interchange and discussions among practitioners in the field of machinery vibration analysis, condition monitoring, balancing, reliability, maintenance and associated technologies. The aim of the seminar is to encourage the exchange of ideas and experience among end users, suppliers, academics/researchers, and those performing ‘hands-on’ work in the field. We are excited to bring you Nelson Baxter as our keynote speaker. Nelson is a well-known leader in our field, a Vibration Institute National Director and was the keynote speaker at the 2011 Reliability Conference in Australia. Abstracts for papers, presentations, and short courses on topics relating to vibration, reliability and maintenance are being accepted. For more information, please visit: http://www.cmva.com/annualseminar.asp |
Monday, November 18 2013 to Thursday, November 21 2013
Recurring Yearly
Location: Calgary, Alberta
Contact: Julie West, Events Coordinator events@pemac.org
PEMAC (Plant Engineering and Maintenance Association of Canada) 6-2400 Dundas Street West, Suite 402 Mississauga, ON L5K 2R8
|
PEMAC Maintrain 2013
Theme: Implementing Change MainTrain 2013 will be all about implementing change. We are working to bring workshops, experience-based presentations and case studies that highlight the transformation process when pursuing excellence in maintenance, reliability and asset management of large scale physical assets in any industry. What change (large or small) did you implement or attempt to implement? What factors led to the initiation of the change? What factors got the change initiative really rolling? What were the impediments? What were the risks? Has the change been sustained? If so, how? If not, why not? What role did people, processes, and technology play? Speakers will get a free pass to the conference. For more information please visit http://www.maintrain.ca/call-for-papers.html |
To Be Announced
Location: Toronto, Montreal, Vancouver and Ottawa
Contact: If you are interested in taking any of these courses in French, online, or arranging for onsite delivery within your organization, please e-mail us at training@scc.ca. If you have any questions, do not hesitate to contact Roger Coyne at rcoyne@scc.ca or 613-238-3222 Ext 407.
|
Announcing SCC's New Training Courses
The Standards Council of Canada (SCC) is pleased to offer a number of high-level training courses relating to a broad range of current standardization topics, including : - Addressing the challenges associated with counterfeit products and marks - Navigating the international standardization system, how it works Understanding the development and approval of, national and international standards - How to become an effective participant to the standards development process - Standards and technical barriers to trade - Using standards as a tool to gain market access - The process and rationale for harmonization of standards - Mastering the accreditation requirements of various SCC programmes SCC courses are developed and delivered by experienced subject matter experts and trainers. Through provocative result-based discussions and interactive group work, SCC courses provide attendees with valuable insights into the complex world of standardization. For a complete list of SCC's course offerings in 2010-11, please visit https://www.scc.ca/en/get_involved/course-outlines. |
Events Worldwide
To see a summary of Past Events, click here.
| Date | Event Description |
Tuesday, June 11 2013 to Thursday, June 13 2013
Location: Helsinki Exhibition & Convention Centre, Finland
Contact: Mr. Antti Heljo Finnish Maintenance Society Promaint email: info@comadem2013.net Visit: http://www.comadem2013.net/
|
Comadem 2013
The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM2013) is being held in Helsinki, the capital of Finland. The Congress will cover a wide range of subjects in engineering, manufacturing, process, environment, energy and human factors management including keynotes, technical papers, poster sessions and exhibition stands. The Congress will also feature an active and varied social programme with lots of opportunities for networking with delegates and speakers from industry, academia and government whilst enjoying the beautiful sights and hospitality of Helsinki, the white pearl of the Baltic Sea. |
Wednesday, June 12 2013 to Saturday, June 15 2013
Location: Houston, Texas, USA
Contact: To contact ASNT, please click on the link below and contact the appropriate individual: http://www.asnt.org/contact/contact.ihtml
|
International Chemical and Petroleum Industry Inspection Technology XIII Conference
ASNT and the Greater Houston Section invite you to submit an abstract for the International Chemical and Petroleum Industry Inspection Technology XIII Conference ICPIIT is the forum for participants to exchange ideas and experiences. The discussions offer relevant chemical and petroleum industry topics and enable participants to share innovative and problem solving ideas. • Bring your knowledge to share by presenting a paper. • Bring your questions and challenges to your colleagues. • Bring your interest in seeing and learning about innovations in the industry. Submit your abstract. Be part of this unique conference. |
Sunday, June 16 2013 to Tuesday, June 18 2013
Location: Sunway Putra Hotel Kuala Lumpur, Malaysia
Contact: Submit abstracts or papers to:
nassir@nuclearmalaysia.gov.my or mukriz@nuclearmalaysia.gov.my
|
MINDTCE 2013
The Malaysian Society for NDT proudly announcing its bi-annual conference for new, advanced and innovative NDT methods including: « NDT management, training, qualification and certification « Digital industrial radiography « Safety and security in industrial radiography « Application for metallic and nonmetallic material « Application in nuclear power industries « Computed Tomography For more information visit: http://www.ndt.net/event/Brochure%20Announcement%20MINDTCE13%20final.pdf |
Tuesday, June 18 2013 to Thursday, June 20 2013
Location: Kraków, Poland
Contact: Karen Cambridge and Amy Cooke BINDT Conference Department The British Institute of Non-Destructive Testing Newton Building St George's Avenue Northampton NN2 6JB United Kingdom Tel: +44 (0) 1604 893831 Fax: +44 (0) 1604 893861 Email: karen.cambridge@bindt.org or amy.cooke@bindt.org
|
BINDT - 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies
Please note that you can now submit abstracts to present at this year's Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, taking place from 18-20 June 2013 at the Qubus Hotel, Kraków, Poland. If you would like to take this opportunity to present at this prestigious event please click on the following link. http://mc.manuscriptcentral.com/cm2013-mfpt2013 Please note the following key dates for the submission of abstracts and full papers. Abstract submission – 25 January 2013 Full paper submission – 29 March 2013 To book your accommodation BINDT has secured a limited number of bedrooms on a bed and breakfast rate at the Qubus Hotel, Kraków for an excellent discounted rate.
Single room occupancy with full breakfast – €90 Double room occupancy with full breakfast – €100
To book your accommodation for the Qubus Hotel, please contact the hotel direct using the discounted reference quote: BINDT.
Telephone: +48 12 374 5100; Email: krakow@qubushotel.com">krakow@qubushotel.com Further information about the conference can be found at http://www.cm-mfpt.org |
Wednesday, July 31 2013 to Friday, August 2 2013
Location: Quebec City, Quebec, Canada
Contact: Université Laval Québec (Québec) Canada G1V 0A6
Quantitative infrared thermography - Electrical and Computing Engineering Dept. Phone: 418 656-2962 Fax: 418 656-3159
Email: quebec@gel.ulaval.ca
Visit http://isem2013.gel.ulaval.ca/home/
|
16th International Symposium on Applied Electromagnetics and Mechanics (ISEM)
Previous symposia were held in Italy, Japan, Korea, the United Kingdom, Germany, Italy, France, Austria, USA and China. As in the past, the 2013 meeting will be focused on the application of electromagnetics and mechanics in a number of disciplines. Specifically, the symposium provides a forum for exchanging ideas and discussing recent developments in many diverse areas relating to applied electromagnetics and mechanics. The symposium emphasizes both basic science and early engineering developments in these interdisciplinary fields. The symposium also strongly encourages practical application of emerging technologies to problems of direct relevance to industries. Consequently, both theoretical as well as applied research topics are of interest. |
Wednesday, September 4 2013 to Friday, September 6 2013
Location: PORTORO, Slovenia
Contact: Janez Grum, Chairman of the Conference President of the Slovenian NDT Society University of Ljubljana, Faculty of Mechanical Engineering Slovenia
http://www.fs.uni-lj.si/ndt
General information about Slovenia & Portoro http://www.slovenia.info/ http://www.portoroz.si/
|
12th International Conference for Application of Contemporary Non-Destructive Testing in Engineering
FIRST ANNOUNCEMENT CALL FOR PAPERS The Slovenian Society for Non-Destructive Testing is organising the 12th International Conference for the Application of Contemporary Non-Destructive Testing in Engineering |
Tuesday, September 10 2013 to Thursday, September 12 2013
Location: Telford, UK
Contact: The Conference Department The British Institute of Non-Destructive TestingNewton Building, St George’s Avenue, Northampton NN2 6JB, UK. Tel: +44 (0)1604 89 3830 Fax: +44 (0)1604 89 3861 Email: conferences@bindt.org
|
BINDT - NDT 2013
NDT 2013 will consist of three technical sessions in parallel.
Offers of papers are invited on all aspects of nondestructive testing including: • Rail and Axle Testing • Aerospace • Power Generation • Nuclear • NDT of Food • NDT in Forensic Science • Automated and Robotic NDT • Theoretical Modelling • Inspection Qualification • Composites and many more topics For more information, please visit the BINDT NDT 2013 Website |
Wednesday, September 11 2013 to Tuesday, September 17 2013
Location: Essen, Germany
Contact: DVS - German Welding Society Düsseldorf / Germany
Phone: +49 (0) 211 1591-0 Fax: +49 (0) 211 1591-200 E-Mail: info@dvs-hg.de InterNet: www.die-verbindungs-spezialisten.de
|
2013 IIW Annual Assembly
Welcome to IIW2013-Essen – a "one-of-a-kind" Experience!! It is a great honour and privilege for DVS – German Welding Society to welcome the IIW family to Germany for the 4th time. After Essen (1957), Düsseldorf (1973) and Hamburg (1998), the IIW Annual Assembly and International Conference will return to the North Rhine-Westphalia region in 2013 for its 66th edition, scheduled for 11th – 17th September in Essen. For more informaiton please visit http://www.dvs-ev.de/IIW2013/. Come and join us in September 2013! Welcome to Essen - Wilkommen in Essen! Klaus Middeldorf, General Manager DVS – German Welding Society |
Monday, October 7 2013 to Thursday, October 10 2013
Location: Calgary, Alberta (Canada)
Contact: Don Courchesne Member Services Coordinator Canadian Institute for NDE Telephone: 905-387-1655 ext. 238 1-800-964-9488 ext. 238 Fax: 905-574-6080 CINDE website CINDE events CINDE on Facebook: Search "Canadian Institute for NDE"
|
NDT in Canada 2013 Conference
The Cansmart Group (CANSMART), Fraunhofer Institute for Nondestructive Testing (IZFP) and the Canadian Institute for NDE (CINDE) invite authors and presenters to submit abstracts for the International Workshop on Smart Materials and Structures, SHM, and NDT for the Energy Industry to be held in conjunction with the NDT in Canada 2013 Conference. The program will feature presentations on advances in NDT pertaining to the energy industry including emerging techniques and trends for the oil and gas, petrochemical, nuclear, hydroelectric, solar, and wind turbine sectors. Special sessions featuring national and international speakers will address the current outlook for smart materials, smart structures, and associated applications which include NDE and structural health monitoring. Other topics include the inspection of materials, testing of structures, and recent developments in NDT personnel training, education, and certification. For conference information please visit our website: http://events.cinde.ca |
Thursday, October 10 2013 to Friday, October 11 2013
Location: Zagreb, Croatia
Contact: HDKBR Berislaviæeva 6 10000 Zagreb Croatia
Tel: +385 1 61 57 129 Fax: +385 1 61 57 129
E-mail: info@certification2013.com
|
Certification 2013 - 7th NDT International Conference on Certification and Standardisation
The aim of the conferences is to inform professionals about new developments in fields of non-destructive testing, certification, standardization, laboratory accreditation, harmonization of qualification and regulations.
The speakers will be renowned leaders and professionals in the respective fields. The upcoming conference and side events will provide great opportunity to meet well known colleagues and acquaintances, and to exchange what is new in professional and other fields with your friends.
For more information, please visit: http://www.certification2013.com/ |
Thursday, October 10 2013 to Friday, October 11 2013
Location: Bogota, Columbia
Contact: For support us in the development of any thematic pertinent to the congress, whether a conference or a short course, please contact:
Camilo Cruz, VII Congress Coordinator viicongresoacosend@gmail.com ACOSEND Bogota,Colombia www.acosend.org
|
VII Congress of Welding and Nondestructive Tests
The Colombian Welding and Non Destructive Tests Society (ACOSEND) in its commitment with the country’s industry development will bring the VII Welding and Non Destructive Tests Congress. This congress will take place between October 10th and 11th of the present year in Colombia, Bogotá. This event is the process that ACOSEND has realized across the last 23 years that satisfies its mission of promoting and fomenting with national and international cooperation, the scientific and technologic growth about Welding and Non Destructive Tests. For further information please call to (051) 212 5836 or to (051) 211 8017. |
Monday, November 4 2013 to Thursday, November 7 2013
Location: Las Vegas, Nevada USA
Contact: American Society for Nondestructive Testing PO Box 28518 1711 Arlingate Lane Columbus, OH 43228-0518 USA Toll free: (800) 222-2768 Local: (614) 274-6003 Fax at (614) 274-6899.
|
ASNT Fall Conference
The ASNT Annual Conference 2013 will provide a forum for the exchange of theoretical, scientific and application information. In this challenging economy you need to stay informed and up to date on the latest advances in NDT technology. Participating in this conference will expand your knowledge while increasing your visibility. For more information click here. |
Monday, January 27 2014 to Thursday, January 30 2014
Location: Colorado Springs, Colorado
Contact: Reliability and Maintainability Symposium 200 Cordoba Court Merritt Island, Florida 32953 publicity@rams.org (818) 586-1412 WWW.RAMS.ORG
|
Reliability and Maintainability Symposium (RAMS) 2014 Conference
RAMS invites you to submit an abstract for the 2014 conference program. The theme of the 2014 RAMS is: Engineering Customer Trust. The 60th Annual Reliability & Maintainability Symposium (RAMS) will be held at The Broadmoor in beautiful Colorado Springs, Colorado. Abstracts are due by April 15, 2013. Click here for details.
|
Sunday, March 2 2014 to Friday, March 7 2014
Location: Melbourne, Australia
Contact: CONGRESS ORGANISERS
ICMS Pty Ltd PO Box 170 Hawthorn VIC 3122 P: 1300 792 466 fatigue2014@icms.com.au http://www.fatigue2014.com/
|
11th International Fatigue Congress 2014
The Fatigue 2014 Congress will be the eleventh in a series of major international conferences held since 1981 covering all aspects of fatigue of materials, components, vehicles and structures including the key issues of managing the service life of fatigue - affected structures and parts. All papers will be reviewed and published, and will be available at the Congress.
IMPORTANT DATES Abstract Submission Deadline 1 June 2013 Acceptance Notification to authors 15 July 2013 Full Paper Submission 1 September 2013 Final Paper Submission Deadline 22 November 2013 ONLINE ABSTRACT SUBMISSION NOW OPEN - Abstract Submission Deadline - 1 June 2013 http://wired.ivvy.com/event/IFC14/abstract/request
For more information, please visit: www.fatigue2014.com |
Monday, October 6 2014 to Friday, October 10 2014
Location: Prague, Czech Republic
Contact: ECNDT 2014 Organising Committee email: ecndt2014@guarant.cz or cndt@cndt.cz http://www.ecndt2014.com/ Phone: +420 284 001 444 Fax: +420 284 001 448
|
Welcome to ECNDT 2014
European Conference on NDT (ECNDT) is organised by the European Federation for NDT (EFNDT) in cooperation with one elected national NDT Society every four years. EFNDT General Assembly in January 2009 entrusted the Czech Society for NDT (CNDT) with organizing the 11th ECNDT in the year 2014. As the conference venue was chosen capital of the Czech Republic Prague on October 6-10. The conference, joined with large exhibition of NDT technique and services, will provide the good opportunity to present the latest research results and the newest NDT technique along with current applications. It will be also a nice chance to showcase the Czech Republic as a heart of Europe with its magical city Prague. We believe that the 11th European Conference on NDT will provide a big forum for the meeting of NDT specialists, researchers, students, and all common users of NDT techniques and services from around the world. We hope that also you will participate at this outstanding NDT/NDE event. |
Ontario Chapter Events

| Schedule for all meetings, unless otherwise noted: |
| Cocktails: | 6:00 pm |
| Dinner: | 7:00 pm |
| Technical Session: | 8:00 pm |
| Attendance must be confirmed prior to all functions. |
To see a summary of Past Events, click here.
| Date | Event Description |
To Be Announced
Location: TBA
Contact: Dan Gonzalez- P-905 464 6010 Marc Forbes- 519 829 6448
|
CINDE Ontario Chapter Golf Tournament
The Ontario Chapter will be hosting the Golf Tournament in the Spring of 2013! We are currently working to provide the details... please stay tuned! |
Quebec Chapter Events

To see a summary of Past Events, click here.
Alberta Events

To see a summary of Past Events, click here.
| Date | Event Description |
Wednesday, May 8 2013 to Monday, September 9 2013
Location: Alberta
Contact: Don Courchesne, Member Services Coordinator
Canadian Institute for NDE 135 Fennell Ave. West Hamilton, ON L8T 1J8 905-387-1655 memberservices@cinde.ca
|
Alberta Chapter Executive Committee - Call for Nominations
The petition to form an Alberta Chapter of the Canadian Institute for NDE was well received, with over 70 members across the province expressing their approval and support. Candidates are now sought to help form the first Chapter Executive (Chapter Chair, Vice Chair, Program Chair, Secretary/Treasurer) Interested individuals should contact Don Courchesne, CINDE Member Services Coordinator at 1-800-964-9488 Ext. 238. For more information about CINDE events please visit events.cinde.ca |
Friday, May 10 2013 to Friday, June 21 2013
Location: Various locations, Alberta
Contact: Don Courchesne Member Services Coordinator Canadian Institute for NDE Telephone: 905-387-1655 ext. 238 1-800-964-9488 Fax: 905-574-6080 memberservices@cinde.ca
|
EATS 2013 Winter Schedule
EATS has provided a winter schedule for various events in Alberta. Please click here for the schedule of event listings (in PDF format). |
© Canadian Institute for NDE [ Privacy Policy | Terms of Use | Back to Main Page ]
Registered as a private career college under the Private Career Colleges Act, 2005 |